BLUE STAR POWER AMPLIFIER
POWER CORD
This circuit cable is made of Palladium plated Pure Silver
(99.99%purity) Round cross section wire. Current conductors are as follows:
line and neutral – a twisted Round wire 13 AWG, ground (GND) – a twisted Round
wire 11 AWG. The selection of a wire with a round cross section for this Power
Amp power cable is based on the necessity to suppress high-frequency
interferences generated in an electric circuit.
One approach to increasing the external surface
area of a conductor is to use a ribbon wire for interconnects. This improves
the transmission of high-frequency signals and, as the result, stabilizes the
phase relationship among the individual components of the spectrum of a sound
signal in the complete frequency range. This, in turn, improves such important
parameters of the resultant signal as transparency, softness, depth and air
extension.>
However, the requirements for a power cable for
applications in high-quality audio equipment are different. In this case, the
transmission of high-frequency signals (for a power cable, these are circuitry,
RF and EMI interferences) dramatically reduces the sound quality and must be
minimized.
Therefore, any cross section in a current
transmitting lines, other than the round one, of a current-carrying conductor
(at fixed AWG) leads to the increase of the external surface area and,
consequently, permits the transmission of undesirable high-frequency signals.
This ultimately produces a very detrimental effect on the quality of the
resultant sound signal. Hi-Fi equipment, regardless of its quality, is not
capable of completely suppressing the distortion caused by the AC power source.
In addition to the above-described advantage, ELCO
AUDIO, Inc ‘BLUE STAR’ Power Amp Power Cord is equipped with two Gold
plated Audio Grade Copper grounded covers that installed onto Wall and IEC plug
together with outer shield provide 100% RF/EMI protection from Environmental
Electromagnetic distortions. For a complete electrical continuity with a central
conductor, input and output contacts of cable connectors are plated with
Palladium over the silver substrate.
Summary:
13 AWG Line and Neutral Palladium plated pure silver(99.99% purity) twisted wire.
11 AWG Ground Palladium plated pure silver (99.99% purity)twisted wire.
Current-carrying conductors with a round cross section reducing the effect of high-frequency interferences
Static Charge protective Cable outer jacket.
Completely(100%) covered heavy-duty
electromagnetic shield and Gold plated Audio Grade Copper grounded
connectors covers.
Modified Arrow Hart Palladium over
silver plated contacts of wall plug.
Modified Audio grade WATTGATE Palladium over silver
plated contact IC plug.
The combination of these design features makes this cable one of the best products
available on today’s audio market.
|
|
